Connect with us

3d Printer hacks

Doubled Up 3D Printer Upgrade Doubles The Fun

Published

on

[Nathan] from Nathan Develops Robotics on YouTube is familiar with modding 3D printers, whether it’s a great concept or otherwise, it’s simply enjoyable to learn occasionally. His most recent experience he calls the Double Ender (video clip, ingrained listed below), where he not just increases up the hotend, however the increases up a couple of various other little bits as well. The objective was to accomplish double product printing, with his certain objective to integrate ordinary nylon as well as carbon fiber-loaded nylon in the very same print, to obtain the most effective residential or commercial properties of both products.

<< img data-attachment-id="" 527169" data-permalink="" https://hackaday.com/2022/03/17/doubled-up-3d-printer-upgrade-doubles-the-fun/snap-2022-03-16-at-17-05-29/" data-orig-file=" https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png" data-orig-size="" 1920,1080" data-comments-opened=" 1" data-image-meta=" {" aperture" ":" 0"," credit score":"""," electronic camera":" "," subtitle":""," created_timestamp":" 0"," copyright"":""," focal_length":"""0""," iso"""":"" 0"," shutter_speed"":"" 0"," title":"""""," positioning":"""0""}" data-image-title="" Break 2022-03-16 at 17.05.29""data-image-description=""("*) https://www.youtube.com/watch?v=FHK-s3yqwek&t=4s

“””data-image-caption”=” “” data-medium-file =” https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?w=400″ data-large-file=” https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?w=800″ loading=” careless” course=” wp-image-527169 size-medium” alt=”” size=” 400″ elevation=” 225″ srcset=” https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png 1920w, https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?resize=250,141 250w, https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?resize=400,225 400w, https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?resize=800,450 800w, https://hackaday.com/wp-content/uploads/2022/03/Snap-2022-03-16-at-17.05.29.png?resize=1536,864 1536w” dimensions=”( max-width: 400px) 100vw, 400px”/ >

Improves outcomes on the initial shot!

Taking a supply Ender 3 v2,

initially sets up a double Z axis set, increasing up the Z axis screw as well as linked stepper electric motors. Likely this was required to make up for the extra weight of succeeding mods. Given that the supply Ender mainboard has just one Z axis port, the much less noticeable option was to simply mount a 2nd mainboard! By leveraging the tremendous hackability of the[Nathan], he had the ability to obtain this strange setup to function.Klipper printer firmware/software stack Next the almost all of the construct; the Phaetus Tai Chi double warm end setup. Somehow, at first, it was made a decision to integrate the supply bowden injector/extruder with a straight drive 2nd system, which we think maintains the reciprocating weight down a little bit as well as does allow you straight contrast bowden as well as straight drive print results on the very same device. Anyhow, the initial double product prints appeared respectable after a couple of (rapidly played down )stops working, as well as did function all right that dual-nylon printing can currently be a choice. After switching over the construct to a double direct-drive configuration,

located it simpler to obtain the device to switch over filaments much more accurately, that makes feeling when you consider the influence of all that added filament in the bowden tube.[Nathan] plainly has been shed( have not all of us?) perhaps essentially, by the interested routine of some Chinese vendors, of arbitrarily appointing power supply polarity to red/black cable sets. The option, rather belt-and-braces, was to just compose customized power line with an ingrained rectifier. Well, we think that’s one much less point to stress over, however do avert when those PSU hacks are being revealed!

[Nathan] Multi-material or multi-color FDM printer choices are plenty, below’s an amazing method of utilizing a servo to turn a set of hotends to the very same factor, as well as we likewise saw a while back, a means of utilizing a sprung-loaded rocker to turn the extra hotend up out the method when not required.

Many Thanks(* )for the pointer!

Continue Reading
Click to comment

Leave a Reply

3d prining

Brighten Up Your Prints With This Nail Polish Approach

Published

on

By

It’s inadequate to 3D-print a component– there’s a myriad of points you can do from there! [FuzzyLogic] reveals us his technique of adding inlay labels, icons and text to a 3D print, by extruding them right into the print and also loading the resulting tooth cavity with nail gloss! This produces vibrant and also helpful prints, rather than plain single-color components we normally wind up with.

The evil one’s in the information, and also [FuzzyLogic] has actually obtained the information to a method. Toenail gloss needs to be watered down with acetone to make sure that it streams well, and also a specific mix of syringe and also needle will certainly be your pal right here. Obviously, do not fail to remember to variable surface area stress in– despite having well-diluted nail gloss, you can not make the grooves as well slim. A little bit much more acetone on a q-tip assists in situation of any type of delighted little mishaps, and also a layer of clear acrylic spray paint secures the lettering securely in position. The five-minute video clip informs you everything about these points and also a fairly couple of much more, like the essentials of squeezing out message and also symbols in a normal CAD plan, and also has a little incentive video footage to those seeing up until completion.

Including markings to our prints is a beautiful completing touch! If you’re seeking even more of that, right here’s a custom-made tool-changing printer with a pen accessory making lovely personalized units for the Pocket Driver

Continue Reading

3d printer

5-Axis 3D Printing For The Rest Of Us

Published

on

By

Now we’re all made use of to the concept of 3 dimensional printing, as over the last fifteen years approximately it’s come to be an important device for any person with a rate of interest in making points without a commercial range spending plan. There are still a couple of restrictions to the strategies made use of in an usual 3D printer however, specifically being connected to layers in a solitary positioning. It’s something that can be resolved by including tilt and also rotational axes to the printer to provide a five-axis gadget, yet this has actually not been offered in an inexpensive type. [Freddie Hong] and colleagues have tackled the production of an affordable printer, and also his option fits nicely on the bed of a Prusa i3 to transform it to five-axis equipment without damaging the financial institution.

The amount and also top quality of the job is definitely remarkable, with appropriate cutting software program being established together with the 3D published components to fit both added axes. In the meantime all we can do is check out the images and also the video clip listed below the break, once the job has actually existed the assurance that all the essential data will certainly be revealed. We can see variations of the equipment locating their method onto printers aside from the Prusa, and also we can see this ending up being yet one more item of the normal depot offered to those people that make points.

Continue Reading

3d Printer hacks

3D Printed Shoes Make Bigfoot Tracks

Published

on

By

[Stephan Henrich] is most likely mosting likely to trigger a wave of bigfoot discoveries if his brand-new footwear, the Cryptide sneaker removes. The footwear is totally 3D published in adaptable TPE making use of a laser sintering printer from Sintratec. The footwear takes a name from cryptozoology and also, as a matter of fact, would certainly leave a perplexing impact as a result of its articulated toes and also scaly-looking sole.

Going by the appearance of the single, it must be quite pleasant and also we assume if you were 3D printing these, you would certainly check or exactly determine the designated foot for an ideal fit. You can see a video clip regarding the footwear listed below.

The whole footwear is made from a solitary product, however various components of the footwear have various levels of rigidity produced by differing the density of the TPE. Evidently, Sintratec is truly right into footwear considering that they additionally are showcasing the Earth Moc by[Daniel Shirley] We questioned why they really did not publish a 2nd footwear for the man at the beginning of that video clip.

We aren’t certain the footwear’s geography would certainly be convenient with a normal printer you may locate in your garage. Yet if you do publish up some shoes, make sure to allow us recognize. Not that we have not seen some 3D published tennis shoes, mind you. Footwear gears, however, appear less complicated to publish.

Continue Reading

Trending

%d bloggers like this: