Connect with us

3d Printer hacks

DIY Wunderwaffe And Others Make Up This Open-Source Arsenal

Published

on

Unless you keep up all evening and also have a loads printers going, it’s most likely way far too late to make one of these beautiful prop weapons made by [Andrew] of The Ray Weapon Job in time for Halloween. The majority of them are from Phone call of Responsibility: Zombies, though there is an amazing little nightclub explosive from Fortnite too.

Every one of the jobs are superb, yet we selected to highlight the Wunderwaffe DG-2 from COD: Zombies because, well, vacuum cleaner tubes. For those not familiar with the ‘waffe’s procedure, those vacuum cleaner tubes function as ammunition publications. Once they’re vacant, you power them down with that huge red button and also expel them one by one with the bar, similar to in the video game.

Within is a Plume M0 Express that runs the RGB LEDs and also utilizes a Hall result sensing unit to review magnets in the quick-change ammunition publication. You can see just how it operates in the demonstration video clip after the break.

There are BOMs for numerous of the prop tools, in addition to setting up illustrations and also assistance discussion forums for any individual that wishes to develop their very own. Do not seem like collecting all the little bits and also bobs on your own? [Andrew] is marketing equipment packs for the ray weapon, yet you’ll need to hunt the components on your own if you intend to develop the Wunderwaffle.

Are you a Grinch that wishes to maintain youngsters off of your yard? Scare ’em off with a large NERF weapon.

Continue Reading
Click to comment

Leave a Reply

3d printed

Secret Ingredient For 3D-Printed Circuit Traces: Electroplating

Published

on

By

Conductive filament exists, however it takes even more than that to 3D print something like a motherboard. The primary problem is that traces made from conductive filament are primarily resistors; they do not imitate cords. [hobochild]’s intriguing means around this trouble is to use electroplating to coat 3D-printed traces with metal, for that reason producing a sort of 3D-printed motherboard. [hobochild] does not yet have a great deal of nitty-gritty information to share, however his procedure appears rather clear. (Update: great information! here’s the project page and also GitHub repository with even more information.)

The normal trouble with electroplating is that the challenge be layered requirements to be conductive. [hobochild] addresses this by utilizing 2 various products to develop his examination board. The base layer is published in routine (non-conductive) plastic, and also the board’s extra-thick traces are published in conductive filament. Electroplating deals with finish the conductive traces, causing a quite attractive 3D-printed motherboard whose conductors include real steel. [hobochild] utilized conductive filament from Proto-pasta and also the board is a proof-of-concept blinking LED circuit. Soldering could be a difficulty offered the reality that the underlying product is still plastic, however the dual-material print is a fascinating angle that also permits layered vias and also through-holes.

We have actually seen conductive filament utilized to efficiently publish practical electric links, however applications are restricted as a result of the nature of the filament. Electroplating, an innovation available to essentially every cyberpunk’s workbench, remains to be related to 3D printing in intriguing means and also could be a means around these restrictions.

Continue Reading

3d printer

Full Color 3D Printing With The Help Of An Inkjet Head

Published

on

By

3D printing is a prominent procedure, though among the hangups is that components are usually generated in simply one level shade. [Aad] has actually been servicing a basic adjustment to his Prusa i3 printer, nevertheless, that allows the manufacturing of full-color parts.

<< img data-attachment-id="" 509107" data-permalink="" https://hackaday.com/2021/12/04/full-color-3d-printing-with-the-help-of-an-inkjet-head/_0-19-screenshot/" data-orig-file=" https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png" data-orig-size="" 1497,1080" data-comments-opened=" 1" data-image-meta=" {" aperture ":" 0"," credit report":"""," video camera":" "," inscription":""," created_timestamp":" 0"," copyright"":""," focal_length":"""0""," iso"""":"" 0"," shutter_speed"":"" 0"," title":"""""," positioning":"""0""}" data-image-title="" _ 0-19 screenshot" data-image-description="" data-image-caption="

Keep in mind the twin upright settings up– one lugging the extruder,”the various other lugging an”inkjet print head. ”

.” data-medium-file=” https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png?w=400″ data-large-file=” https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png?w=800″ loading=” careless” course=” size-medium wp-image-509107″ alt=”” size=” 400″ elevation=” 289″ srcset=” https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png 1497w, https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png?resize=250,180 250w, https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png?resize=400,289 400w, https://hackaday.com/wp-content/uploads/2021/11/0-19-screenshot-e1637826541984.png?resize=800,577 800w” dimensions=”( max-width: 400px) 100vw, 400px”/ >

Keep in mind the twin upright settings up– one lugging the extruder, the various other lugging an inkjet print head.

The hack is easy, including a 2nd upright structure added to the printer. Instead of installing a 2nd extruder, nevertheless, there’s a inkjet printer head providing CMYK water-based inks. After the major extruder sets each layer of clear PLA plastic, the print is after that relocated under the inkjet head, which sets tinted inks prior to the following layer is published, as seen in this print video.

[Aad] keeps in mind the outcomes are currently incomplete. The ink appears to hemorrhage in between layers, combining with the plastic after it is put down. Additional screening with various inks and also filaments remains in the pipe, nevertheless, intending to boost top quality and also comparison of the outcomes.

We have actually seen various other methods to the shade 3D printing problem previously, also. Video clip after the break.

Continue Reading

3d Printer hacks

Finally, A Use For Old Cellphones

Published

on

By

In what is currently a three-year lengthy search, I have actually lastly located the excellent usage for an old mobile phone. As well as with it, the response to a burning concern: Why aren’t we hacking cellular phones?

Initially, the application. The Octo4a job allows you utilize an old Android phone as a 3D printer web server, internet user interface, and also also time-lapse electronic camera to make those good films where the print appears to mature out of absolutely nothing prior to your eyes. It’s the excellent application for an old phone, utilizing the memory, Wi-fi, graphics capacities, and also also the touch-screen if you desire neighborhood control of your prints.

Linking to the phone was the primary difficulty that I have actually constantly seen in establishing for mobile phone jobs, since I have robotics applications in mind. Yet Octo4a navigates this with reduced or no initiative. The majority of 3D printers are created to operate on USB anyhow, so linking it to the phone is as straightforward as purchasing a USB OTG cable television. With the USB port taken control of, powering the phone long-run comes to be a little trouble, which can be fixed with a Y-cable or a little solder. Maintain the OS from going to rest, in some way, and also it’s trouble fixed!

Yet below’s why this isn’t an option, and also it mentions the much deeper trouble with mobile phone hacking that lots of mentioned in the remarks 3 years back. Octoprint is composed in Python, and also as a result of this is really simple to compose expansions for and also to hack on, if that’s your point. When I initially saw Octo4a, I assumed “oh fantastic, a functioning Android Python port”. After that I mosted likely to explore the code.

Octo4a is composed in Kotlin and also utilizes the Gradle structure. It’s a total port of Octoprint, not simply to a various system, yet to a various shows language and also to a nearly completely various shows standard. My hat is off to [feelfreelinux] for doing it, yet my hunch is that the area of other individuals proficient sufficient in Kotlin and also Python to assist port throughout upstream adjustments in Octoprint is a great deal smaller sized than the area of Python designers would certainly have been. Octo4a is a fantastic job, yet it’s not a stroll in the park to establish on it.

So every one of you that composed in the remarks to my previous item that it’s the Android software application ecological community that’s protecting against phone reuse, well below’s the exemption that confirms your guideline! A specialized and also gifted, multi-lingual designer area can draw it off, yet the difficulty is so high that couple of will certainly increase to it.

Anyhow, many thanks [Feelfree Filip] for your magnum opus! I’ll be putting this on my old S4.

Continue Reading

Trending

%d bloggers like this: